Product Description
“VBU-DS-IDP-W” is a Casambi to DALI control device. It uses Bluetooth Low Energy communication to receive a command signal from the Casambi App and convert the command into DALI commands according to the selected fixture profile. Also, VBU-DS-IDP -W has an integrated DALI Bus Power Supply with 20mA guaranteed current , it can control up to 8 DALI LED drivers individually or by group. There are many Casambi fixture profiles available for VBU-DS-IDP-W that include different control modes: Broadcast, Short Address, Groups, DT6, DT8.
Functions
• Can control up to 8 DALI drivers
• Can control DT6 or DT8.
• Can control DALI drivers individually or by group.
Features
• Works with casambi.
• Connect casambi and DALI.
• Short-circuit / no-load / overload protection
• High flexibility，each driver can be an independent intelligent luminaire or a part of group.
Technical data
Nominal input voltage | 220 … 240 Vac | |
Input voltage range | 198 … 264 Vac | |
Input frequency | 50 … 60 Hz | |
Input current | ≤ 20 mA | |
Starting time(220Vac, full load, 25℃) | < 500ms | |
No load Power consumption | < 0,5W | |
Power consumption standby | < 0,5W | |
Output control interface | DALI | |
Max. number of drivers connected | 8 | |
Firmware update | OTA (Over The Air) | |
Protections | Short circuit protection Overload protection No-load protection | |
Operating temperature range | -20ºC … +50ºC | |
Max. casing temperature tc | 65℃ | |
Storage Temperature | -20ºC … +80ºC | |
voltage accuracy | ±10% | |
Ripple (220V,full load) | ±5% | |
DALI | Bus voltage | 14-16 VDC |
Guaranteed current | 20mA | |
Maximum current | 70mA | |
RF | Communication interface | BLE |
Communication protocol | Casambi | |
Operating frequencies | 2402–2480 MHz | |
Max. transmission power | +7 dBm | |
Wiring | Solid size | 0,5 … 1,5 mm2 |
Stranded size | 30 … 15 AWG | |
Wire strip length | 6,5mm | |
IP | IP20 | |
Dimensions | 146*35.5*28mm | |
Certifications | CE, RCM | |